Kits
Comprise:
Transmitter with carry strap
Receiver with matching plug/socket
2 x batteries
Charger (specify 10-30Vdc or 110/240Vac)
Aerial (internal/external/extension as specified)
Manuals & Drawings
Receivers
TYPE ARM - Analogue + CANOpen
8-30 VDC
IP65
-20
O
C to +70
O
C operating
202 x 230 x 96 mm
Expandable to 64 Digital, 12 Analogue (Either PWM or Voltage/Ratiometric)
Inputs available (for logic and feedback)
CAN / CANOpen + physical I/O
TYPE ARX Compact Analogue
Optional CANOpen
8-30 VDC
IP65
-20
O
C to +70
O
C operating
202 x 123 x 83 mm
Dual-channel safety output selectable as either STOP or Dump-Valve
6 x bi-directional PWM, 8 x Voltage/Ratiometric outputs
12 x Digital outputs
Expandable up to 28 digital outputs
2 x 1-axis paddles
Sample Configurations
2 x 2-axis joysticks
2 x 2-axis joysticks
with data feedback graphic Display
Locally designed and built
to your specifications
- IP65 transmitters and receivers
- Rugged fibreglass-reinforced nylon housings
- Frequency-hopping spread-spectrum radios for high reliability, interference
resistant links
- Completely automatic frequency management
- Electronic smart-key for identity-coding simplifies set-to-work of spare
transmitter
- Fully electronic receivers with programmable logic capabilities
- CAN/CANOpen in all receivers
- Data feedback models available - via CAN or receiver inputs
- STOP protected to PLe / Cat 4 / SIL 3
- Unexpected motion from standstill protected to PLd / Cat 3 / SIL 2
- 11 hour run time on a single 4hr charge (9.5 hr for feedback versions)
- Speeds teachable from the transmitter
- Cable-control option (for when radio use is prohibited)
FJS Transmitter
TYPE CRX Compact CANOpen
8-30 VDC
IP65
-25
O
C to +70
O
C operating
144 x 162 x 63 mm
1 x safe output (selectable as STOP or SAFETY) as push-pull pair
4 x FET outputs 2A
Other outputs over CAN / CANOpen