Dynamic Series
FJL - Dynamic series - Up to 6 single-axis proportional paddles - Up to 6 additional toggle switches - Data feedback versions available
FJS - Dynamic series - Up to 2 x 2-axis proportional joysticks or - Up to 2 x 1-axis proportional paddles - Up to 5 additional toggle switches - Data feedback versions available
FJR- Dynamic series - Up to 3 x 2-axis proportional joysticks or - Up to 6 x 1-axis proportional paddles - Many toggle switch / push button options - Data feedback versions available
FJM - Dynamic series - Up to 4 x 2-axis proportional joysticks or - Up to 8 x 1-axis proportional paddles - Many toggle switch / push button options - Data feedback versions available
Dynamic Series The Autec Dynamic series is simply the best proportional radio control system on the market today. Drawing on Autec’s almost 30-years experience with safety- remotes, the Dynamic series brings the best of modern design and modern components to the industry. A full range of transmitter styles covers all applications from the simple, to the complex, with a wide variety of joysticks, paddles, switches, and controls available. The 915MHz frequency-hopping spread-spectrum (FHSS) radios operate reliably an interference-free in to the most arduous conditions, and require no operator intervention at all - just turn them on and they work, and keep working. CANOpen integration is thorough, with the ability to build complete CAN systems, or hybrid systems where the radio control and PLC share the control tasks. Graphic screens are available on all models, and can display sensor data from physical inputs, or be controlled over CANopen. - IP65 transmitters and receivers - Rugged fibreglass-reinforced nylon housings - Frequency-hopping spread-spectrum radios for high reliability, interference resistant links - Completely automatic frequency management - Electronic smart-key for identity-coding simplifies set-to-work of spare transmitter - Fully electronic receivers with programmable logic capabilities - CAN/CANOpen available in all receivers - Data feedback models available - via CAN or receiver inputs - STOP protected to PLe / Cat 4 / SIL 3 - Unexpected motion from standstill protected to PLd / Cat 3 / SIL 2 - 11 hour run time on a single 4hr charge (9.5 hr for feedback versions) - Speeds teachable from the transmitter - Cable-control option (for when radio use is prohibited) Our engineers can custom-design your solution and build it for you in Australia, with rapid delivery times.
FJB - Dynamic series - Optimised for drill-rigs and other applications with complex requirements for controls and actuators - 4,3” and 7” Codesys colour screens available as an option
PJE - Dynamic series - Up to 4 x 2-axis proportional joysticks or - Up to 9 x 1-axis proportional paddles - Up to 18 x side-mounted buttons - Many toggle switch / push button options - 4.31” monochrome or 4.3” colour Codesys display versions - CAN / CANOpen / J1939 Receiver available
Dynamic Series
FJL - Dynamic series - Up to 6 single-axis proportional paddles - Up to 6 additional toggle switches - Data feedback versions available
FJS - Dynamic series - Up to 2 x 2-axis proportional joysticks or - Up to 2 x 1-axis proportional paddles - Up to 5 additional toggle switches - Data feedback versions available
FJR- Dynamic series - Up to 3 x 2-axis proportional joysticks or - Up to 6 x 1-axis proportional paddles - Many toggle switch / push button options - Data feedback versions available
FJM - Dynamic series - Up to 4 x 2-axis proportional joysticks or - Up to 8 x 1-axis proportional paddles - Many toggle switch / push button options - Data feedback versions available
Dynamic Series The Autec Dynamic series is simply the best proportional radio control system on the market today. Drawing on Autec’s almost 30-years experience with safety-remotes, the Dynamic series brings the best of modern design and modern components to the industry. A full range of transmitter styles covers all applications from the simple, to the complex, with a wide variety of joysticks, paddles, switches, and controls available. The 915MHz frequency-hopping spread-spectrum (FHSS) radios operate reliably an interference-free in to the most arduous conditions, and require no operator intervention at all - just turn them on and they work, and keep working. CANOpen integration is thorough, with the ability to build complete CAN systems, or hybrid systems where the radio control and PLC share the control tasks. Graphic screens are available on all models, and can display sensor data from physical inputs, or be controlled over CANopen. - IP65 transmitters and receivers - Rugged fibreglass-reinforced nylon housings - Frequency-hopping spread-spectrum radios for high reliability, interference resistant links - Completely automatic frequency management - Electronic smart-key for identity-coding simplifies set-to-work of spare transmitter - Fully electronic receivers with programmable logic capabilities - CAN/CANOpen available in all receivers - Data feedback models available - via CAN or receiver inputs - STOP protected to PLe / Cat 4 / SIL 3 - Unexpected motion from standstill protected to PLd / Cat 3 / SIL 2 - 11 hour run time on a single 4hr charge (9.5 hr for feedback versions) - Speeds teachable from the transmitter - Cable-control option (for when radio use is prohibited) Our engineers can custom-design your solution and build it for you in Australia, with rapid delivery times.
FJB - Dynamic series - Optimised for drill-rigs and other applications with complex requirements for controls and actuators - 4,3” and 7” Codesys colour screens available as an option
PJE - Dynamic series - Up to 4 x 2-axis proportional joysticks or - Up to 9 x 1-axis proportional paddles - Up to 18 x side-mounted buttons - Many toggle switch / push button options - 4.31” monochrome or 4.3” colour Codesys display versions - CAN / CANOpen / J1939 Receiver available