PJE Transmitters
- IP65 transmitters and receivers
- Rugged fibreglass-reinforced nylon housings
- Frequency-hopping spread-spectrum radios for high reliability, interference resistant
links
- Completely automatic frequency management
- Simple and safe pairing of transmitters with receivers (no code-keys required)
- Fully electronic receivers with programmable logic capabilities
- CAN/CANOpen/J1939 support
- Data feedback models available with monochrome or full-colour displays
- STOP protected to PLe / Cat 4 / SIL 3
- Unexpected motion from standstill protected to PLd / Cat 3 / SIL 2
- Cable-control option (for when radio use is prohibited)
- Optional 4.1” monochrome display or 4.3” programmable Codesys colour display
- up to 18.5 / 35 hour run time on a single 4hr charge (LPM-02/LPM-04 battery)
- 8 hour runtime for 4.3” colour-display version with LPM-04 battery
Sample Configurations
complex system with feedback
Locally designed and built
to your specifications
Kits
Comprise:
Transmitter with carry strap
Receiver with matching plug/socket
2 x batteries
Charger (specify 10-30Vdc or 110/240Vac)
Aerial (internal/external/extension as specified)
Manuals & Drawings
Receivers
TYPE CRP CANOpen/J1939
8-30 VDC
IP65
-25
O
C to +70
O
C operating
198 x 155 x 72 mm
2 x STOP outputs (high-side)
2 x SAFETY/UMFS outputs ( 1 x high-side,1 x low-side)
4 x FET outputs 2A
Other outputs over CAN / CANOpen /J1939 (2 ports available)
- 1 x port supports CAN 2.0b / CANOpen
- 1 x port supports J1939
4.3” Display
PJE Transmitters
- IP65 transmitters and receivers
- Rugged fibreglass-reinforced nylon housings
- Frequency-hopping spread-spectrum radios for high reliability, interference resistant
links
- Completely automatic frequency management
- Simple and safe pairing of transmitters with receivers (no code-keys required)
- Fully electronic receivers with programmable logic capabilities
- CAN/CANOpen/J1939 support
- Data feedback models available with monochrome or full-colour displays
- STOP protected to PLe / Cat 4 / SIL 3
- Unexpected motion from standstill protected to PLd / Cat 3 / SIL 2
- Cable-control option (for when radio use is prohibited)
- Optional 4.1” monochrome display or 4.3” programmable Codesys colour display
- up to 18.5 / 35 hour run time on a single 4hr charge (LPM-02/LPM-04 battery)
- 8 hour runtime for 4.3” colour-display version with LPM-04 battery
Sample Configurations
complex system with feedback
Locally designed and built
to your specifications
Kits
Comprise:
Transmitter with carry strap
Receiver with matching plug/socket
2 x batteries
Charger (specify 10-30Vdc or 110/240Vac)
Aerial (internal/external/extension as specified)
Manuals & Drawings
Receivers
TYPE ARM - Analogue + CANOpen
8-30 VDC
IP65
-20
O
C to +70
O
C operating
202 x 230 x 96 mm
Expandable to 64 Digital, 12 Analogue (Either PWM or
Voltage/Ratiometric)
Inputs available (for logic and feedback)
CAN / CANOpen + physical I/O
TYPE ARX Compact Analogue
Optional CANOpen
8-30 VDC
IP65
-20
O
C to +70
O
C operating
202 x 123 x 83 mm
Dual-channel safety output selectable as either STOP or
Dump-Valve
6 x bi-directional PWM, 8 x Voltage/Ratiometric outputs
12 x Digital outputs
Expandable up to 28 digital outputs
TYPE CRP CANOpen/J1939
8-30 VDC
IP65
-25
O
C to +70
O
C operating
198 x 155 x 72 mm
2 x STOP outputs (high-side)
2 x SAFETY/UMFS outputs ( 1 x high-side,1 x low-side)
4 x FET outputs 2A
Other outputs over CAN / CANOpen /J1939 (2 ports available)
- 1 x port supports CAN 2.0b / CANOpen
- 1 x port supports J1939
4.3” Display
