safety plcs
Digsy Fusion-S controllers
Digsy Fusion-S The Intercontrol Fusion-S is a 32-bit safety controller which can be used in safety-relevant control to PLd / Category-3. The Fusion-S appears to the designer as 2 separate PLCs - one safety PLC (which runs the safety program and controls the I/O ) and one Standard PLC. Dividing the tasks in this way means that the safety-relevant program can be segmented from the user program - this drastically simplifies the ability to make changes to the system wthout the verification and documentation burden associated with altering the safety program. Programmable in CodeSYS 3.5 SIL2, only one safety program need be written. The redundant architecture and lock-step CPUs handle the safety-managment transparently, with no design effort. - PLd Cat 2/3 dual-channel design with cross-checking - Second shut-off mechanism for outputs - 6 models from 48-240 I/O - Powerful 32-bit 200MHz dual-core lock-step CPU + FPU - Mechanically and electrically robust - Shock, vibration, and EMC proof - Rock-fall and saltwater resistant - Integrated load-dump protection - Protected to IP6K9K/IP6K7 - 162 x 252 x 67 mm/115mm/162mm - 8-32Vdc operating - Operating temperature -40 O C to +80 O C - 4 x CAN interfaces (each of which can run CanOpen / CanOpenSafety / CAN2.0b / J1939) - 2 x RS232 interfaces - 1 x Ethernet interface (programming, UDP, TCP/IP) - 1 x USB interface for program update in the field, data-logging, parameterisation Up to 6 x I/O units, each with -16 pins each configurable as 20mA/10V/32V analogue inputs or digital inputs - 8 pins each configurable as high speed counter (single or quadrature) or digital inputs - 6 pins each configurable as active-high or active-low digital input - 8 pins each configurable as 2.5A PWM (open/closed loop), digital input or output - 4 pins each configurable as 4A PWM (open/closed loop), digital input or output - 6 pins each configurable as 4A output or digital input - 2 pins as rerence voltages 5V/10V switchable - 1 pin as sensor supply (filtered power) 400mA
Digsy Fusion-SP - Performance Version The Fusion-S is also available in a performance version of 1-5 modules (48-192 I/O) that adds to the Fusion-G - Powerful 32-bit 400MHz co-processor - 4 x additional CAN interfaces (each of which can run CanOpen/CAN 2.0b / J1939) - Additional Ethernet port capable of running webserver - Real-time clock -
Digsy Fusion-SP controllers
safety plcs
Digsy Fusion-S controllers
Digsy Fusion-S The Intercontrol Fusion-S is a 32-bit safety controller which can be used in safety-relevant control to PLd / Category-3. The Fusion-S appears to the designer as 2 separate PLCs - one safety PLC (which runs the safety program and controls the I/O ) and one Standard PLC. Dividing the tasks in this way means that the safety-relevant program can be segmented from the user program - this drastically simplifies the ability to make changes to the system wthout the verification and documentation burden associated with altering the safety program. Programmable in CodeSYS 3.5 SIL2, only one safety program need be written. The redundant architecture and lock-step CPUs handle the safety-managment transparently, with no design effort. - PLd Cat 2/3 dual-channel design with cross-checking - Second shut-off mechanism for outputs - 6 models from 48-240 I/O - Powerful 32-bit 200MHz dual-core lock-step CPU + FPU - Mechanically and electrically robust - Shock, vibration, and EMC proof - Rock-fall and saltwater resistant - Integrated load-dump protection - Protected to IP6K9K/IP6K7 - 162 x 252 x 67 mm/115mm/162mm - 8-32Vdc operating - Operating temperature -40 O C to +80 O C - 4 x CAN interfaces (each of which can run CanOpen / CanOpenSafety / CAN2.0b / J1939) - 2 x RS232 interfaces - 1 x Ethernet interface (programming, UDP, TCP/IP) - 1 x USB interface for program update in the field, data-logging, parameterisation Up to 6 x I/O units, each with -16 pins each configurable as 20mA/10V/32V analogue inputs or digital inputs - 8 pins each configurable as high speed counter (single or quadrature) or digital inputs - 6 pins each configurable as active-high or active-low digital input - 8 pins each configurable as 2.5A PWM (open/closed loop), digital input or output - 4 pins each configurable as 4A PWM (open/closed loop), digital input or output - 6 pins each configurable as 4A output or digital input - 2 pins as rerence voltages 5V/10V switchable - 1 pin as sensor supply (filtered power) 400mA
Digsy Fusion-SP - Performance Version The Fusion-S is also available in a performance version of 1-5 modules (48-192 I/O) that adds to the Fusion-G - Powerful 32-bit 400MHz co-processor - 4 x additional CAN interfaces (each of which can run CanOpen/CAN 2.0b / J1939) - Additional Ethernet port capable of running webserver - Real-time clock -
Digsy Fusion-SP controllers