LKNeo-DF with colour graphics display

Comprise: Transmitter Carrying Pouch/Strap Receiver with rapid-termination spring terminals 2 x batteries (standard or Li-ion as specified) Charger (specify 10-30Vdc or 110/240Vac) Aerial (internal/external/extension as specified) Manuals & Drawings

TYPE ACRS13-L / ACRS13-G

40-264 VAC 13 relays + STOP + SAFETY 4 x inputs (G version only) Environmental protection to IP65 -20 O C to +70 O C operating 123 x 258 x 83 mm Internal aerial standard/ External aerial option

TYPE DCRS13

9-30VDC (also 24Vac with internal aerial only) 13 relays + STOP + SAFETY 4 x inputs Environmental protection to IP65 -20 O C to +70 O C operating 123 x 258 x 83 mm Internal aerial standard/ External aerial option

TYPE MVRCAN

8-30Vdc / 24Vac Environmental protection to IP65 -20 O C to +70 O C operating 144 x 120 x 63 mm External aerial 4 x Outputs + STOP CANOpen/ CAN2.0B TPDOs contain transmitter status RPDOs can control feedback LEDs on the transmitter

LKNeo6

LKNeo8

LKNeo10

LKNeo12

STANDARD FEATURES - STOP function up to PLe /SIL 3 (model dependant) - Rugged fibre-reinforced nylon cases to IP65 - 6, 8, 10, or 12 x 2-speed push-buttons - Frequency Hopping Spread Spectrum (FHSS) 915-928MHz or 433/915 dual-band Listen-Before-Talk radios (depending on model) - Licence-free throughout Australia and New Zealand (LIPD/SRD Class Licensed) - Completely automatic frequency management - Superior operating range in challenging environments - Stable radio link even for long-range applications (including tower cranes, concrete pumps) - 4 x LEDS available to display machine status/operating mode - Receiver can include logic programming that utilises inputs, timers, etc. - More than 8hr per charge (with standard batteries, >16hr with Li-ion option) - The installer can program various features: - PIN code used to start the remote (to prevent unauthorised use) - Selectable operating range - Low-power-start option (requires the operator to approach the machine when first starting the remote to ensure that the act is intentional and the correct remote/machine has been selected) OPTIONS AVAILABLE - Additional toggles potentiometers push-buttons rotary switches BCD switches Keyswitches - Fully customisable full-colour labelling with logos etc. - External smart ID-key for simple, safe transmitter substitution - External M-key as an alternative to PIN code for controlling transmitter access - Li-ion Batteries for extended operating time (>16hr) - Multi-Transmitter, Multi-Receiver, Tandem, Master-Slave, Pitch- Catch systems available. - Side Enable button for ‘dead-man’ functions with panic feature - Hold-to-run - Releasing or depressing further will stop operation - Infra-red (IR) receiver on the transmitter can be used in various ways - Ensure the operator is close to the machine when starting it - Require the operator to be in a specific area when controlling the machine - Make different functions available to the operator depending on their location - Colour graphic screen available in the LKNeoDF type - Explosion-proof versions available in the LKNexEx type

LKNeo8 with ENABLE button, toggle switch, and smart ID-key

TYPE DCRM24

12-24Vdc Environmental protection to IP65 -20 O C to +70 O C operating 185 x 287 x 105 mm 22 x FET outputs + Safety/Flow + STOP 2 x Relay outputs 2 x Expansion slots for - Additional digital outputs (Total of 40 + Safety + STOP possible) - Analogue voltage / PWM outputs - Analogue / Digital / Loadcell inputs - Serial RS232/485/ CANBus / CANOpen Interface - Ethercat , Ethernet/IP, ProfibusDP, Profinet - ModbusRTU (via IndustryIQ module) -Synchronising Module (for multiple-receiver co- ordination of limit-switches, etc) - Internal / External aerial - 8 x inputs for for use in logic or Data Feedback LEDs

MODULAR RECEIVERS FOR COMPLEX SYSTEMS TYPES ACRM5E / MVRL9E/ ACRDIN/ MVRDIN

The above receivers address most common applications, but the AUTEC range also includes modular receivers with great expandability, sophisticated options, and large I/O counts. Our technical team can help choose the best solution for your task.

see also….

LKNeo-EX explosion-proof models

TYPE DCRF13

12 / 24 Vdc 8 x FET outputs, 4A 5 x relays + STOP + SAFETY 4 x inputs Environmental protection to IP65 -20 O C to +70 O C operating 150 x 165.5 x 60 mm External aerial standard Expansion modules for 2 x PWM or 8 x additional FET outputs

TYPE ACRM15 40-264Vac Environmental protection to IP65 -20 O C to +70 O C operating 185 x 287 x 105 mm 15 x Relays + Safety + STOP 2 x Expansion slots for - Additional digital outputs (Total of 31 + Safety + STOP possible) - Analogue voltage / PWM outputs - Analogue / Digital / Loadcell inputs - Serial RS232/485/ CANBus / CANOpen Interface - Ethercat , Ethernet/IP, ProfibusDP, Profinet - ModbusRTU (via IndustryIQ module) -Synchronising Module (for multiple-receiver co- ordination of limit-switches, etc) -Internal / External aerial -4 x inputs for for use in logic or Data Feedback LED