TLP2 Control Pendant
- Ideal for truck tail lifts and other machines where an Emergency-Stop is not required.
- Mechanical interlock between buttons (removable)
- M20 Cable gland
- Standard buttons are up-arrow/ down-arrow - others on request
- 2 x Pushbuttons each with 1-speed NO contacts
TLP Control Pendants
Our TLP control pendants are designed to be used both in the hand and while fixed in place, so perform the duties of both a control station and a pendant. Originally designed for the tail-gate lifters on trucks and vans, they have since found a myriad of applications. All feature: - Easy wiring and installation - Rugged double-insulated enclosures in self-extinguishing thermoplastic - Sealed to IP65 - Spring-cage click-on contact blocks ( 1 or 2 wires each 0.5-2.5mm2) - up to 3 contacts per button - Contacts with 10A (thermal) rating, 690V insulation voltage - NO contacts are slow-break, double-gap, self-cleaning - NC contacts are positive break so suitable for Emergency-Stop use (EN418 etc) - AC15 contact ratings (e.g AC solenoids): 16A@24Vac 5A@230Vac, 4A@400Vac - DC13 contact ratings (e.g. DC solenoids): 2A@24Vdc - Suitable fuse rating gG-10A/500V
TLP3B Control Pendant
- Ideal for truck tail lifts and other machines where an Emergency-Stop is needed
- Mechanical interlock between buttons (removable)
- M20 Cable gland
- Standard buttons are up-arrow/ down-arrow - others on request
- 2 x Pushbuttons each with 1-speed NO contacts
TLP4 Control Pendant
- Build your own customised 4-button control station
- With or without Emergency stop
- M20 Cable gland
- Standard buttons are up-arrow/ down-arrow - others on request
- 2 x Pushbuttons each with 1-speed NO contacts
TLP Accesories
- Wall-mount holder grips TLP securely
- Ideal for vehicle use
- Use buttons while mounted, or pull up and out to use in the hand.
- Spiral cable gland controls bend radius and helps preserve cable
